PRODUCTS > MEDICAL > KIMAL > PRODUCTS p. 2

 
Link to Website
   
 

KIMAL PRODUCTS

go to page: << 1 2 3 >>
 

GUIDWIRES

HYDROPHILIC G/WIRE

Its one to one torque and handling characteristics are second to none, with good radio opacity and excellent lubricity. AF2 is the choice of many interventionalists around the globe.

GUIDWIRE PACKED STERILE
STR TEF GUIDWIRE 
GUIDWIRE PACKED STERILE SUPPER STIFF
STR PTCA GUIDEWIRE
J TEF GUIDEWIRE

What are they?

Extremely technical. Guidewires are coiled wire around a central core. They are available in different lengths and sizes to assist in catheter placement. This review can only cover the key points of guidewire construction and use.

Howare they used?

A guidewire is threaded through an introducer needle into an artery or vein. The body of the wire is flexible to avoid damage to the vessel. The tip of the wire is either rounded into a J curve to pick up any resistance, or it is straight and soft, for the same reason.  Most cardiologists and radiologists prefer a J3 (3 mm curved) to a straight guidewire. Anesthetists prefer straight flexible tips.

Guidewires for longer-term use are coated with Teflon. Short term or renal dialysis wires are uncoated.
The length of the wire is determined by the catheter.

Since the early 1960‘s Kimal plc have been involved in the sale and manufacture of Teflon and stainless steel safety guidewire.
Angiographic and Seldinger guidewires come in lengths of 40 cm to 260 cm in both ‘J’ and straight tip configurations; Kimal’s guidewire portfolio includes Amplat, Benston, Rosen, Newton and PTCA wires.

This extensive selection of wires covers all radiographic needs in both Radiology and Cardiology departments. Kimal are constantly expanding their range of interventional wires in line with their customers requests and needs.

ANGIOGRAPHY SETS/KITS

SINGLE Y CONN WITH INSERTION
DOUBLE BALLOON ANGIOPLASTY PROCEDURES
NEW STEERABLE TORQUE DEVICE
P.T.C.A INRODUCER SET

The kimal haemostasis rotating valve has a large central lumen (up to 9 Fr Catheters), clear body, large non-removable thumb wheel and tapered insertion port, packed with a guidewire insertion tool.

Dual haemostasis rotating valve is used in double wire/double balloon Angioplasty procedures, packed with a guidwire insertion tool.

Steerable, two-part torquer for use with both fine and hydrophilic wires. To be used with guidewire 0.010” to 0.38” diameter.

PRESSURE MONITORING KIT

Pressure monitoring is a standard procedure used regularly in Intensive Care, Theatres, High Dependency and Cardiology. The choice offered by Kimal includes standard and customised user specific disposable system as well as environmentally friendly semi-reusable standard and customised user specific disposable systems.
Both systems are easy to set up and to use and our systems include connecting cables, organizers and IV pole mounts. For more details, please contact your Kimal representative who will be pleased to demonstrate our systems and help you configure systems to meet your specific requirements.

DOUBLE PRESSURE TRANSDUCER SET

The UTAH Medical Deltran disposable transducer products have been regarded by many as the very best in disposable transducers – designed, engineered and tested for the highest standard of accuracy and reliability. Both standard and custom designed pressure-monitoring sets are available.

2 PORT CUT A WAY RIGHT OFF HALF MANIFOLD
3 PORT RIGHT OFF HALF MANIFOLD

At the heart of the fluid management kit, the manifold is a device with rotating adaptor to facilitate catheter torquing without disturbing the fluid management. Manifolds are different from stopcocks; they have large bore and continuous, uninterrupted fluid paths.

Manifolds are primarily used to deliver saline and contrast and allow the measurement of pressure during angiography and angioplasty.

At Kimal we are continually looking at ways to improve our product choice. This can be seen with a positive step forward in our Manifold range. Our old full body manifolds have been re-designed and converted to half body ergonomic versions with a pressure rating 250 psi. The leading manufacturers of manifolds in the world promote half body as being the gold standard.

 

 

go to page: << 1 2 3 >>

 
     
HOME | PRODUCTS | ABOUT US | CONACT US

Copyright © 2010-KTC - All Rights Reserve